PENGUKURAN BEBAN KERJA ALLOWANCE DAN FULL-TIME EQUIVALENT (FTE) KARYAWAN MIE GACOAN UNTUK MENJAGA PRODUKTIVITAS KARYAWAN

Authors

  • Aditia Fajar D Fakultas Teknik, Teknik Industri, Universitas Bhayangkara Jakarta Raya.
  • Iqbal Naufal Fakultas Teknik, Teknik Industri, Universitas Bhayangkara Jakarta Raya
  • Sulthon Muammar S Fakultas Teknik, Teknik Industri, Universitas Bhayangkara Jakarta Raya
  • Paduloh Fakultas Teknik, Teknik Industri, Universitas Bhayangkara Jakarta Raya

Keywords:

Measurement, Workload, Allowance and Full-Time Equivalent (Fte), Gacoan Noodle Employees, Employee Productivity.

Abstract

This study aims to analyze employee workload at Mie Gacoan using the Allowance and Full-Time Equivalent (FTE) methods in order to maintain work productivity and efficiency. Data collection was conducted through direct observation on site, involving three main divisions: cashiers, chefs, and waiters. The results showed that the allowance values for cashiers, chefs, and waiters were 34.5%, 35%, and 33%, respectively. FTE calculations revealed that cashiers had a value of 0.93 (underload category), while chefs and waiters had values of 1.09 and 1.16 (normal category), respectively. These findings emphasize the importance of optimizing allowance and FTE values to achieve a balance between operational efficiency, employee job satisfaction, and customer service quality. This optimization is expected to reduce work fatigue, increase productivity, and maintain operational cost efficiency.

References

Arya Hadid Pangestu, Alan Setiyawan, Teuku Alfiansyah, Hedi Sutiawan, Dwi Aliega Fauzi, & Nurli Dian Stefani Sianturi. (2024). Analisis Beban Kerja Dokter di Klinik Pratama Ubhara Jaya dengan Metode Full Time Equivalent. Lokawati : Jurnal Penelitian Manajemen Dan Inovasi Riset, 2(4), 63–75. https://doi.org/10.61132/lokawati.v2i4.966

Bakhtiar, B., Syarifuddin, S., & Putri, M. P. (2021). Pengukuran Beban Kerja Dengan Metode Full Time Equivalent Dan Penentuan Jumlah Tenaga Kerja Efektif Menggunakan Workload Analysis. Journal of Industrial Engineering and Operation Management, 4(1). https://doi.org/10.31602/jieom.v4i1.5332

Damayanti, M. K. (2023). Perencanaan Kebutuhan Pegawai Berdasarkan Analisis Beban Kerja Melalui Metode Fte (Full Time Equivalent) Pada Pt. X. Civil Service Journal, 17(1), 1–14. https://doi.org/10.61133/pns.v17i1.388

Matiro, M. A. D., Mau, R. S., Rasyid, A., & Rauf, F. A. (2021). Pengukuran Beban Kerja Menggunakan Metode Full Time Equivalent (FTE) Pada Divisi Proses PT. Delta Subur Permai. Jambura Industrial Review (JIREV), 1(1), 30–39. https://doi.org/10.37905/jirev.1.1.30-39

Sabilah, A. I., & Daonil, D. (2023). Analisis Beban Kerja Karyawan dan kebutuhan Karyawan pada Divisi Pengelasan di PT TI. Blend Sains Jurnal Teknik, 1(3), 251–258. https://doi.org/10.56211/blendsains.v1i3.207

Wibisono, M. H., & Herwanto, D. (2023). Analisis Beban Kerja pada Karyawan Divisi Produksi PT. Empat Perdana Carton dengan Metode Full Time Equivalent (FTE). Jurnal Serambi Engineering, 8(2), 5135–5141. https://doi.org/10.32672/jse.v8i2.5473

Widyaningrum, S., Asepta, U. Y., Darmadi, S. I., & Geofani, V. A. (2023). Analisis Beban Kerja Menggunakan Metode Full Time Equivalent Divisi Quality Control PT Beiersdorf Indonesia. Jurnal Ilmiah Manajemen Dan Bisnis, 6(2), 1056–1063.

Downloads

Published

2025-01-05

Issue

Vol. 3 No. 1 (2025): Januari

Section

Articles

License

Copyright (c) 2024 Jurnal Ekonomi dan Bisnis

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.